Hi,I have electric fencing around my field,3 strands of cord to keep my sheep in.I have an electric Shepard 300 energizer box,which when I put my tester on the existing fence it flashes up 5000 volts the highest reading and when I touched it by accident it made me cry out loud as I cavorted about.
I have connected in 2 poultry nets by connecting a jumper from the existing fence to the metal clip on the net. when i test the voltage now the original fence is reading 4000volts and the poultry nets are only giving 2000volts is this normal or even good enough to keep a fox out, it still made me jump when i touched it I certainly wouldn't want to touch it again.
My fence box is supposed to OK for 24 nets,I have a meter long earth steak knocked fully in the ground I have also chucked a bucket of water over it well 5 gallons to make sure its wet,I have s trimmed under all the existing fence and the nets.The battery is new 100ah.
Any advice would be greatly appreciated,I really don't know what to do will it be OK.
Graham.
I have connected in 2 poultry nets by connecting a jumper from the existing fence to the metal clip on the net. when i test the voltage now the original fence is reading 4000volts and the poultry nets are only giving 2000volts is this normal or even good enough to keep a fox out, it still made me jump when i touched it I certainly wouldn't want to touch it again.
My fence box is supposed to OK for 24 nets,I have a meter long earth steak knocked fully in the ground I have also chucked a bucket of water over it well 5 gallons to make sure its wet,I have s trimmed under all the existing fence and the nets.The battery is new 100ah.
Any advice would be greatly appreciated,I really don't know what to do will it be OK.
Graham.